Skip to main content

balenaEtcherPro_logo_dark


AC-DC cutting-stripping process

EtcherPro v1

Contents​

TBC-

Step 1: Producing 14cm AC cable batches​

  • Turn on the wire cutter
  • Turn the Wire cutters’ handles to position UP
  • Place the brown 2,5mm2 ac cable into the wire cutter
  • Turn the Wire cutters’ handles to position ROLL
  • Choose program number 1
  • When the cable is in the right place press RUN
  • 100 batch will be produced and you will hear the beep sound
  • Place the items in the storage box
  • Repeat the process for the blue and yellow cables.

Step 2: Producing 40cm AC cable batches​

  • Turn the Wire cutters’ handles to position UP
  • Place the brown 2,5mm2 AC cable into the wire cutter
  • Turn the Wire cutters’ handles to position ROLL
  • Choose program number 2
  • When the cable is in the right place press RUN
  • 100 batch will be produced and you will hear the beep sound
  • Place the items in the storage box
  • Repeat the process for the blue and yellow cables.

Step 3: Producing 24cm DC cable batches​

  • Turn the Wire cutters’ handles to position UP
  • Place the black/red 1,5mm2 DC cable into the wire cutter
  • Turn the Wire cutters’ handles to position ROLL
  • Choose program number 3
  • When the cable is in the right place press RUN
  • 100 batch will be produced and you will hear the beep sound
  • Place the items in the storage box